CHANGES OF HEIGHT (& VOLUME)

• Height change of 1,800 mm. to 1,900 mm.
• Height change of 1,800 mm. to 2,000 mm.
• Height change of 1,800 mm. to 2,100 mm.
• Height change of 1,800 mm. to 2,200 mm.
• Height change of 1,800 mm. to 2,300 mm.
  

CHASSIS OPTIONALS

• Gooseneck chassis.
• Pneumatic folding bumper.
• Aluminium support legs.

AXLES AND SUSPENSIONS OPTIONALS

• Change of JOST axles for BPW or VALX DISCO.
• JOST self steering axle.
• Axles prepared for self inflating.
• Self-inflating system.
• First axle lift managed by EBS.
• Change of tyres 6 BRIDGESTONE OBRA MT1 for 6 CONTINENTAL HTC1.
• Change of tyres 6 BRIDGESTONE OBRA MT1 for 6 GOOD-YEAR MST II.
• Change of tyres 6 BRIDGESTONE OBRA MT1 for 6 MICHELIN X WORKS.
• Change of tyres 6 BRIDGESTONE ROAD R168 for 6 CONTINENTAL CHT3.
• Change of tyres 6 BRIDGESTONE ROAD R168 for 6 GOOD-YEAR KMAX T.
• Change of tyres 6 BRIDGESTONE ROAD R168 for 6 MICHELIN MULTI T.
• Spare tyre Good Year MSTII or RHTII with steel rim.
• Spare tyre Michelín XZY3 or XTE3II with steel rim.
• Spare tyre CONTINENTAL with steel rim.
• Spare tyre BRIDGESTONE with steel rim.
• Change of 6 steel rims for 6 aluminium rims ALCOA MATE.
• Change of 6 steel rims for 6 aluminium rims ALCOA LEVEL ONE.
• Change of 6 steel rims for 6 aluminium rims ALCOA DURABRIGHT.
• Change of 6 steel rims for 6 aluminium rims ACCURIDE EXTRA POLISH.
• Change of 6 steel rims for 6 aluminium rims ACCURIDE ACCU-SHIELD.
• DO NOT INSTALL automatic descent of suspension when tipping with possibility of cancelling from control box.
• DO NOT INSTALL handle for height control of suspension.

LAMA BODYWORK OPTIONALS

• Weld slats internally at 100%.
• Lineal meter of 4 mm slat thick.

ELECTRICAL INSTALLATION OPTIONS

• 1 working light with switch (max 2).
• 1 working light type LED.
• 5 functions lights type LED.

HYDRAULIC OPTIONALS

• Change cylinder EDBRO to HYVA or OLESA.

FLOOR OPTIONALS

• Change 6 mm thick floor for 8 mm thick, H34 alu.

DOOR OPTIONALS

• Semi-watertight door for swing door (not recommended with grain door) (Two side closures, three lower handle closures, rubber gasket in the frame without aluminum round interior).
• Universal book back and swinging WITH OR WITHOUT DINTEL (a right-hand hatch, falleba and falleba half, tension chain with supports for arches, 2 lower locks of handle, retractable back staircase, rubber gasket in leaves and frame from the box, 2 holds doors).
• Swing and side door (Side lock on the left side, retractable back staircase, 1 door holder and rubber gasket in the box frame WITH OSCILLATE AND SIDE DOOR.
• Additional porthole for universal door.
• DO NOT mount gate for grain swing door.
  

CANVAS OPTIONALS

• Cramaro awning type C manual with crank, hooks and continuous guide.
• Electrical system with chassis control unit for Cramaro type C awning.
• Remote control for Cramaro awning.
• BOTERO awning per manually operated rail.
• Electrical system with chassis control unit for BOTERO awning.
• Remote control for awning BOTERO.
• Lateral opening canvas with 3 tensioning straps with transverse and 2 longitudinal ratchets (or central bar / s), 3 with hinged canvas, 3 arches between sides, 2 tension chains, front balcony and interior steps.
• Mount front balcony with access ladder and walkway.
• An additional bushing with supports and tension chain.
• Mesh hooks (without mesh)
  

CLOSURE OPTIONALS  (4 HOOKS)

• Change of mechanical lock for pneumatic lock with air pressure to open or close, managed from control box.
• Pneumatic lock with air pressure to open or close, with pull handle in control box and pneumatic point in front of chassis.
• Pneumatic lock with air pressure to open or close, with pull handle in control box and electrical point in front of chassis.
• Pneumatic lock with air pressure to open or close, 3 positions switch (open/ close/auto).
• Pneumatic lock with air pressure to open or close, 2 positions switch (close/auto).
• Pneumatic locks with 4 hooks and 4 air chambers with pressure to open and pressure to close.
• Mechanical or pneumatic lock in stainless steel (ONLY BAR AND HOOKS).
• Mechanical lock in stainless steel (COMPLETE INCL. STEERING MECHANISM).
• Hasps and handle spinning locks in stainless steel.

PAINT OPTIONALS

• Paint box and chassis in different colors.

ACCESSORIES

• Change extinguisher holder 6-9 Kg. by one of 9-12 Kg.
• Excessive 9 kg fire extinguisher drawer.
• 1000 tool drawer.
• Mile count.
• Manometer load indicator.
• Do not mount pneumatic installation for tip-to-chassis tilting.
• INFO- TIM.
• Water can.
• Ladder on the left side.
• Simple front ladder (no balcony).
• 3 m portable ladder
• Portable ladder of 4 m.
• Ladder retractable to the floor.
• Steel tank.
• Brake pad wear indicator kit.
• Center of washing with winder of 10 or 20 m.